Page 77 - RAYCOH_2026ENV3.0_Sensors

The following five different output functions can be selected:

mode condition requirement

Place the target at the near switch point,connect
the TEACH-IN learning cable to the -UB setting A1 SPECIAL SERIES
point until it is green and the indicator light blinks
more than 3 times, disconnect it.
NO
Place the target at the far switch point, connect
Windows mode more than 3 times, disconnect.
the TEACH-IN learning cable to the +UB setting A2
point until it is green and the indicator light blinks
Place the target at the near switch point, connect
the TEACH-IN learning cable to the +UB setting A2
point until it is green and the indicator light blinks
more than 3 times, disconnect.
NC Quick Selection
Place the target at the far switch point, connect
the TEACH-IN learning cable to the -UB setting A1
flat100×100mm round rod Ø 25mm point until it is green and the indicator light blinks Main Products
more than 3 times, disconnect.
Place the target at the near switch point and
Teach-in function connect the TEACH-IN learning cable to the +UB Application
setting A2 point until the green indicator blinks
more than 3 times, disconnect.
Sett switch point NO Connotation
Disconnect by covering the sensor with your hand
Ultrasonic sensor with switch output, the corresponding two or removing all objects within the sensor's
detection range until the green indicator light
switch points can be set. The setting method is to connect blinks more than 3 times. Connect the TEACH-IN Usage pattern
the TEACH-IN learning line to the power supply -UB or +UB learning cable to the -UB to set point A1.
respectively, and the connection time is at least three times Switch Mode
when the indicator light flashes.During the setting process, Place the target at the near switch point, connect Features
the TEACH-IN learning cable to the -UB setting A1
the LED light indicates whether the sensor detects the target. point until the green indicator blinks more than 3
Set A1 point when the TEACHIN learning line is connected to times, disconnect.
-UB, and set A2 point when it is connected to +UB. NC Installation Notes
Disconnect the sensor by covering it with your
hand or removing all objects within the sensor's
detection range until the red indicator light blinks
more than 3 times. Connect the TEACH-IN Accessores
learning cable to +UB to set point A2.
Unstable
Cover the sensor with your hand or remove all
Object presence detection model A1 until the red indicator light blinks more than 3 M12
description
objects within the sensor's detection range. Set
TEACH-IN Learning Cable Connection-UB to point
times to disconnect. Set point A2 by connecting
the TEACH-IN learning cable to the +UB until the
red indicator light blinks more than 3 times to
disconnect.
M18
M30
Factory settings
A1 : Blind zone (minimum working range)
A2 : Maximum range UDA

UCC

UDB

UR

Special Series

Square Series

Wireless Series

UGT