Page 80 - RAYCOH_2026ENV3.0_Sensors

SQUARE SERIES E6/E7 dual switching 3 output modes A2 Target range

Tip: Connect the learning wire to the negative terminal to
set A1; connect it to the positive terminal to set A2.
1.
A1
Switch output 1
black signal wire
Switch output 2
white signal wire
A1
A2
Switch output 1
white signal wire
Switch output 2 Target range
black signal wire

Quick Selection flat100×100mm round rod Ø 25mm
Switch A1 Output 1 ; Detect that existence of an object.
Black wire (NC mode)
Switch A2 Output 2 ; Detect that existence of an object.
Main Products Teach-in function
White wire (NO mode)
Switch A1 &A2 Double output; Detect that existence of
an object
Application
mode condition requirement
Place the target at the near switch point,connect
Connotation the TEACH-IN learning cable to the -UB setting A1
point until it is green and the indicator light blinks
more than 3 times, disconnect it.
NO
Usage pattern
Place the target at the far switch point, connect
Windows mode Place the target at the near switch point, connect
the TEACH-IN learning cable to the +UB setting A2
more than 3 times, disconnect.
Features point until it is green and the indicator light blinks
Installation Notes the TEACH-IN learning cable to the +UB setting A2
point until it is green and the indicator light blinks
more than 3 times, disconnect.
NC
Accessores Place the target at the far switch point, connect
the TEACH-IN learning cable to the -UB setting A1
point until it is green and the indicator light blinks
Unstable more than 3 times, disconnect.
description
Place the target at the near switch point and
connect the TEACH-IN learning cable to the +UB
M12 flat100×100mm round rod Ø 25mm setting A2 point until the green indicator blinks
more than 3 times, disconnect.
NO
Disconnect by covering the sensor with your hand
M18 or removing all objects within the sensor's
detection range until the green indicator light
Switch Mode Place the target at the near switch point, connect
blinks more than 3 times. Connect the TEACH-IN
M30 learning cable to the -UB to set point A1.

UDA the TEACH-IN learning cable to the -UB setting A1
point until the green indicator blinks more than 3
times, disconnect.
NC
UCC Disconnect the sensor by covering it with your
hand or removing all objects within the sensor's
detection range until the red indicator light blinks
more than 3 times. Connect the TEACH-IN
UDB learning cable to +UB to set point A2.

Object presence detection model A1 until the red indicator light blinks more than 3
objects within the sensor's detection range. Set
UR Cover the sensor with your hand or remove all
TEACH-IN Learning Cable Connection-UB to point
times to disconnect. Set point A2 by connecting
Special Series the TEACH-IN learning cable to the +UB until the
red indicator light blinks more than 3 times to
flat10×10mm round rod Ø 8mm disconnect.
Square Series

UF3000 Factory settings
Wireless Series
A1 : Blind zone (minimum working range)
A2 : Maximum range
UGT