Page 70 - RAYCOH_2026ENV3.0_Sensors

UCC SENSOR mode Teach-in function requirement

condition

Place the target at the near switch point,connect
the TEACH-IN learning cable to the -UB setting A1
point until it is green and the indicator light blinks
more than 3 times, disconnect it.
NO
Place the target at the far switch point, connect
Windows mode the TEACH-IN learning cable to the +UB setting A2
point until it is green and the indicator light blinks
more than 3 times, disconnect.
Place the target at the near switch point, connect
the TEACH-IN learning cable to the +UB setting A2
point until it is green and the indicator light blinks
more than 3 times, disconnect.
Quick Selection
NC
Place the target at the far switch point, connect
the TEACH-IN learning cable to the -UB setting A1
Main Products point until it is green and the indicator light blinks
more than 3 times, disconnect.
Application flat100×100mm round rod Ø 25mm Place the target at the near switch point and
connect the TEACH-IN learning cable to the +UB
setting A2 point until the green indicator blinks
more than 3 times, disconnect.
Connotation
NO Disconnect by covering the sensor with your hand
or removing all objects within the sensor's
detection range until the green indicator light
Usage pattern blinks more than 3 times. Connect the TEACH-IN
Switch Mode
learning cable to the -UB to set point A1.
Features Place the target at the near switch point, connect
the TEACH-IN learning cable to the -UB setting A1
point until the green indicator blinks more than 3
times, disconnect.
Installation Notes
NC
Disconnect the sensor by covering it with your
hand or removing all objects within the sensor's
Accessores detection range until the red indicator light blinks
more than 3 times. Connect the TEACH-IN
learning cable to +UB to set point A2.
Unstable
description Cover the sensor with your hand or remove all
Object presence detection model times to disconnect. Set point A2 by connecting
objects within the sensor's detection range. Set
A1 until the red indicator light blinks more than 3
M12 TEACH-IN Learning Cable Connection-UB to point
the TEACH-IN learning cable to the +UB until the
M18 red indicator light blinks more than 3 times to
disconnect.

M30 Factory settings
A1 : Blind zone (minimum working range)
A2 : Maximum range
UDA

UCC

UDB

UR

Special Series

Square Series

Wireless Series

UGT 68