Page 16 - RAYCOH_2026ENV3.0_Sensors

Proximity Switch Mode Window Mode (interval Mode)

The sensor i s provided with an A2 In window mode, the sensor can set two
independent switching point, Different outputs switching points A1 and A2.Each output will only
are activated within the distance of the target be activated in A1 and A2 intervals. The two
passing through the corresponding switching switching points can be arbitrarily set in the
point A2. The switch can be arbitrarily set in the detection range. This working mode is suitable
detection range. for detecting the defective rate of products.
This working mode is suitable for counting or For example, check whether the bottle in the
USAGE PATTERN
presence or absence detection on the conveyor wooden box meets the height standard, Detect
belt. products that are too high or too short.
Quick Selection

Main Products

Application

A2 Switch signal Switch signal A1 Switch signal
Connotation Switch signal output is not output. is not output. Switch signal output A2 is not output.

Usage pattern
blind zone blind zone

Features
Sensing range Switching hysteresis Sensing range Switching hysteresis
Installation Notes

Accessores
Reflex arc mode Double switch mode (hysteres is mode)

Unstable
description
The reflection mode is actually a special Set A1 and A2 points in the detection range of
window mode, Place the fixed reflector in the set the sensor. When the target reaches point A1 or
M12 window. As long as the target object completely A2, the output is switched. When moving from
blocks the reflector, the sensor will send out a point A1(A2) to point A2(A1), the sensor keeps
signal. The working mode is similar to that of the current ON. Off state. Until the point A2(A1)
M18
photoelectric reflector, Ultrasonic sensors don't passes, the output switches to the original state.
need a special reflector, any reflector can be used. This working mode is used to automatically
Whether the target absorbs or transfers sound control liquid level and material level.
M30
waves. This working mode can be used to detect
foam or other sound-absorbing materials.
UDA

UCC

UDB

No target, A1 A2 A1 A2
switch does not output
UR
Maintain state A1 signal
Special Series
blind zone blind zone
Square Series
Sensing range baffle-board Maintain state A2 signal Switching hysteresis
Wireless Series

UGT