Page 39 - RAYCOH_2026ENV3.0_Sensors

UB300 Teach-in function

Y（mm) mode condition requirement
75
Place the target at the near switch point,connect
50 the TEACH-IN learning cable to the -UB setting A1 M18 BENDS
point until it is green and the indicator light blinks
more than 3 times, disconnect it.
NO
Place the target at the far switch point, connect
the TEACH-IN learning cable to the +UB setting A2
-50 point until it is green and the indicator light blinks
more than 3 times, disconnect.
-75
0 50 100 150 200 250 300 350 400 450 500 Windows mode Place the target at the near switch point, connect
X（mm) the TEACH-IN learning cable to the +UB setting A2
point until it is green and the indicator light blinks
more than 3 times, disconnect. Quick Selection
flat100×100mm round rod Ø 25mm NC
Place the target at the far switch point, connect
the TEACH-IN learning cable to the -UB setting A1
point until it is green and the indicator light blinks Main Products
more than 3 times, disconnect.
UB500
Place the target at the near switch point and Application
connect the TEACH-IN learning cable to the +UB
setting A2 point until the green indicator blinks
Y（mm) more than 3 times, disconnect.
200 Connotation
NO Disconnect by covering the sensor with your hand
150 or removing all objects within the sensor's
100 detection range until the green indicator light Usage pattern
blinks more than 3 times. Connect the TEACH-IN
Switch Mode Place the target at the near switch point, connect Features
50 learning cable to the -UB to set point A1.
50 the TEACH-IN learning cable to the -UB setting A1
100 point until the green indicator blinks more than 3
times, disconnect. Installation Notes
150 NC
Disconnect the sensor by covering it with your
200
0 200 400 600 800 1000 hand or removing all objects within the sensor's
detection range until the red indicator light blinks Accessores
X（mm) more than 3 times. Connect the TEACH-IN
learning cable to +UB to set point A2.
Unstable
flat100×100mm round rod Ø 25mm Cover the sensor with your hand or remove all description
Object presence detection model TEACH-IN Learning Cable Connection-UB to point M12
objects within the sensor's detection range. Set
A1 until the red indicator light blinks more than 3
times to disconnect. Set point A2 by connecting
UB1000 the TEACH-IN learning cable to the +UB until the M18
red indicator light blinks more than 3 times to

（Y mm ) disconnect.
400 M30
Factory settings
300
A1 : Blind zone (minimum working range)
200 A2 : Maximum range
UDA
100

100 UCC
200 Teach-in function
300 UDB
400 Sensors of different models or the same model can
0 200 400 600 800 1000 1500
X mm（ ) realize asynchronous function or synchronous function, UR
which needs to be realized by synchronous controller.
flat100×100mm round rod Ø 25mm Special Series

Square Series

Wireless Series

37 UGT