Page 49 - RAYCOH_2026ENV3.0_Sensors

Teach-in function
UB3000

mode condition requirement
Place the target at the near switch point,connect M30 CYLINDER
the TEACH-IN learning cable to the -UB setting A1
point until it is green and the indicator light blinks
more than 3 times, disconnect it.
NO
Place the target at the far switch point, connect
the TEACH-IN learning cable to the +UB setting A2
Windows mode more than 3 times, disconnect.
point until it is green and the indicator light blinks
Place the target at the near switch point, connect
the TEACH-IN learning cable to the +UB setting A2
point until it is green and the indicator light blinks
more than 3 times, disconnect. Quick Selection
NC
Place the target at the far switch point, connect
the TEACH-IN learning cable to the -UB setting A1
point until it is green and the indicator light blinks Main Products
flat100×100mm round rod Ø 25mm more than 3 times, disconnect.
Place the target at the near switch point and Application
UB4000 connect the TEACH-IN learning cable to the +UB
setting A2 point until the green indicator blinks
more than 3 times, disconnect.
Connotation
Y（m) NO Disconnect by covering the sensor with your hand
or removing all objects within the sensor's
1.5
detection range until the green indicator light Usage pattern
blinks more than 3 times. Connect the TEACH-IN
Switch Mode
1.0 learning cable to the -UB to set point A1.
0.5 Place the target at the near switch point, connect Features
the TEACH-IN learning cable to the -UB setting A1
point until the green indicator blinks more than 3
times, disconnect.
Installation Notes
- 0.5 NC
Disconnect the sensor by covering it with your
hand or removing all objects within the sensor's
- 1.0
detection range until the red indicator light blinks Accessores
more than 3 times. Connect the TEACH-IN
- 1.5 learning cable to +UB to set point A2.
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Unstable
X（m) Cover the sensor with your hand or remove all description
Object presence detection model times to disconnect. Set point A2 by connecting
TEACH-IN Learning Cable Connection-UB to point
flat100×100mm round rod Ø 25mm objects within the sensor's detection range. Set M12
A1 until the red indicator light blinks more than 3
the TEACH-IN learning cable to the +UB until the
UB6000 red indicator light blinks more than 3 times to M18
disconnect.

Y（m) M30
Factory settings
1.5 A1 : Blind zone (minimum working range)
A2 : Maximum range
1.0 UDA
0.5
UCC
Teach-in function
- 0.5 UDB
Sensors of different models or the same model can
- 1.0
realize asynchronous function or synchronous function, UR
- 1.5
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 which needs to be realized by synchronous controller.
X（m)
Special Series
flat100×100mm round rod Ø 25mm
Square Series

Wireless Series

47 UGT